Do not over-tighten Can onto RapidGun Applicator- only tighten with 2 fingers: If screwed onto applicator too tightly damage to the valve can occur!
PU Foam Cleaner: Basically, Acetone in a spray can which is used to clean the applicator gun for storage as well as the value of used but not empty foam bottles. Wet foam can be dissolved with the cleaner as well without etching into standard substrates found on site. Once hardened the foam can only be removed/cleaned off mechanically by scraping, cutting or sanding.
Do not over-tighten Can onto RapidGun Applicator- only tighten with 2 fingers: If screwed onto applicator too tightly damage to the valve can occur!
Rasiky RapidGun Applicator: Precise dosage and aim are crucial to economical use of PU Foam which is only achievable by using a gun type applicator. The commonly in DIY stores available PU foam bottle with single-use plastic nozzle is highly inconvenient to use for 3 main reasons.
1) the plastic nozzle is not stiff enough to get the foam to where it should go.
2) the trigger mechanism cannot be controlled i.e too much or too little foam will be dispensed.
3) once opened, the can must be thrown away, cannot keep for next day.

What’s in the Box

9x Rasiky RapidFoam WaterProof PU Foam 750ml can;
1x Rasiky RapidCleaner 600ml can;
1x Rasiky RapidGun DIY Foam Gun Applicator