Applicator for gun-type polyurethane spray foam can

Precise dosage and aim are crucial to the economical use of PU Foam which is only achievable by using a gun-type applicator such as the Rasiky RapidGun. The commonly in DIY stores available PU foam bottle with built-in plastic nozzle is highly inconvenient to use for 3 main reasons.
1) the plastic nozzle is not stiff enough to get the foam to where it should go.
2) the trigger mechanism cannot be controlled i.e too much or too little foam will be dispensed.
3) once opened- the can must be thrown away- cannot keep for the next day.
Clean the applicator, as well as the foam, can valve with Rasiky RapidCleaner for extended storage after use.
Do not overtighten Can on the Applicator- only tighten with 2 fingers: if screwed onto applicator too tightly damage to the valve can occur!

Professional Gun
For the professional window fitter who uses it most days.
Full frame entirely Teflon coated aluminum alloy body with iron trigger,
Aluminum alloy adapter Teflon coated, Teflon Ball valve,
TPR＋PP dual colar handle ＆ TPR flow regulator
Stainless steel barrel and needle, brass nozzle, trigger, adapter and frame all teflon coated.
2 Stage barrel for better pre-expansion of foam.
Comes with 4 plastic extension tubes.

What’s in the Box

1x Rasiky RapidGun Professional PU Foam Appplicator